Differences between the revision of 03:58, 13 April 2020, created by Arshin, and the revision of 01:41, 21 September 2019
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
D-Link-Corp.
differences in the entry: model name
D-Link USB 3.0 Gigabit Ethernet Adapter DUB-1312
differences in the entry: possible other names of the device
differences in the entry: VendorID:ProductID code of the device
2001:4a00
differences in the entry: year of commercialization
2015
differences in the entry: interface
USB
differences in the entry: GNU/Linux distribution used for the test
parabola
differences in the entry: tested with the following kernel libre
5.2.5-gnu-1
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
ax88179_178a
differences in the entry: Description
[p]It is a USB3 1Gbit/s adapter. I didn't test tested it at 1Gbit/s speed yet, only at 100Mbit/s.[/p] - works fine for long periods (several hours).[/p]
lsusb:
[code]Bus 002 Device 010: ID 2001:4a00 D-Link Corp. D-Link DUB-1312[/code]
usb-devices:
[code]
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0
D: Ver= 2.10 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=2001 ProdID=4a00 Rev=01.00
S: Manufacturer=D-Link Elec. Corp.
S: Product=D-Link DUB-1312
S: SerialNumber=**************
C: #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=248mA
I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=ax88179_178a
[/code]
ethtool:
[code]
Settings for enp0s29f7u2:
Supported ports: [ TP MII ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Half 1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Supported FEC modes: Not reported
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Advertised FEC modes: Not reported
Link partner advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
Link partner advertised pause frame use: Symmetric Receive-only
Link partner advertised auto-negotiation: Yes
Link partner advertised FEC modes: Not reported
Speed: 100Mb/s
Duplex: Full
Port: MII
PHYAD: 3
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: pg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information