Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Intel-Corporation
differences in the entry: model name
Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller
differences in the entry: possible other names of the device
differences in the entry: VendorID:ProductID code of the device
8086:1051
differences in the entry: year of commercialization
2003
differences in the entry: interface
PCI
differences in the entry: GNU/Linux distribution used for the test
debian_7
differences in the entry: tested with the following kernel libre
Linux 3.2.0-4-686-pae
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
e100
differences in the entry: Description
~# lspci -d 8086:1051 -vnn
[code]
03:08.0 Ethernet controller [0200]: Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller [8086:1051] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:101a]
Flags: bus master, medium devsel, latency 66, IRQ 20
Memory at e2005000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
[/code]
~# hwinfo --pci
[code]
25: PCI 308.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.yUgdHGRj4GD
Parent ID: 6NW+.c7JTK_YUBi2
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:08.0
SysFS BusID: 0000:03:08.0
Hardware Class: network
Model: "Intel 82801EB/ER (ICH5/ICH5R) integrated LAN Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1051 "82801EB/ER (ICH5/ICH5R) integrated LAN Controller"
SubVendor: pci 0x1734 "Fujitsu Siemens Computers"
SubDevice: pci 0x101a
Revision: 0x02
Driver: "e100"
Driver Modules: "e100"
Device File: eth0
Memory Range: 0xe2005000-0xe2005fff (rw,non-prefetchable)
I/O Ports: 0x3000-0x3fff (rw)
IRQ: 20 (15691 events)
HW Address: 00:30:05:89:dd:f4
Link detected: yes
Module Alias: "pci:v00008086d00001051sv00001734sd0000101Abc02sc00i00"
Driver Info #0:
Driver Status: e100 is active
Driver Activation Cmd: "modprobe e100"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
