Differences between the revision of 07:31, 16 June 2019, created by parajh7, and the revision of 18:51, 28 June 2017
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
Intel-Corporation
Unterschiede: Modellbezeichnung
Intel Corporation 82574L Gigabit Network Connection
Unterschiede: Andere mögliche Gerätenamen
Intel Gigabit CT Desktop Adapter (EXPI9301CT)
Intel® 82574L Gigabit Ethernet Controller
Super Micro Computer Inc 82574L Gigabit Network Connection
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
8086:10d3
Unterschiede: Jahr der Markteinführung
2008
Unterschiede: Schnittstelle
PCI-E
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
parabola, trisquel_7_0
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
5.1.6-gnu-1, 2.6.35-30-generic, Linux-libre 3.13.0-121-lowlatency
Unterschiede: Funktioniert mit Freie Software?
yes
Unterschiede: Verwendete Freie Firmware/Treiber
e1000e
Unterschiede: Beschreibung
[p]lspci -nnk[/p]
[code]
lspci -nnk

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Intel Corporation Device [8086:3578]
Kernel driver in use: e1000e
Kernel modules: e1000e
[/code]

[p]lspci -vmmnn[/p]
[code]
lspci -vmmnn

Slot: 03:00.0
Class: Ethernet controller [0200]
Vendor: Intel Corporation [8086]
Device: 82574L Gigabit Network Connection [10d3]
SVendor: Intel Corporation [8086]
SDevice: Device [3578]
[/code]

[p]lspci -vvnnk[/p]
[code]02:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]
Subsystem: Super Micro Computer Inc 82574L Gigabit Network Connection [15d9:10d3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fbee0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at cc00 [size=32]
Region 3: Memory at fbedc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [c8] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [e0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 0.000W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 256 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr+ TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Exit Latency L0s <128ns, L1 <64us
ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s (ok), Width x1 (ok)
TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
Vector table: BAR=3 offset=00000000
PBA: BAR=3 offset=00002000
Capabilities: [100 v1] Advanced Error Reporting
UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr-
CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+
AERCap: First Error Pointer: 00, ECRCGenCap- ECRCGenEn- ECRCChkCap- ECRCChkEn-
MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap-
HeaderLog: 00000000 00000000 00000000 00000000
Kernel driver in use: e1000e
Kernel modules: e1000e

[/code]

[code]
sudo ethtool eth1
Settings for eth1:
Supported ports: [ TP ]
Supported link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Supported pause frame use: No
Supports auto-negotiation: Yes
Advertised link modes: 10baseT/Half 10baseT/Full
100baseT/Half 100baseT/Full
1000baseT/Full
Advertised pause frame use: No
Advertised auto-negotiation: Yes
Speed: 100Mb/s
Duplex: Full
Port: Twisted Pair
PHYAD: 1
Transceiver: internal
Auto-negotiation: on
MDI-X: off (auto)
Supports Wake-on: pumbg
Wake-on: g
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
[/code]

[h1]References[/h1]
[enum][a]https://www.intel.com/content/www/us/en/support/network-and-i-o/ethernet-products/000006709.html | Supported Operating Systems for Intel® Gigabit CT Desktop Adapter[/a][/enum]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information