Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
Intel-Corporation
Unterschiede: Modellbezeichnung
Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller
Unterschiede: Andere mögliche Gerätenamen
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
8086:1051
Unterschiede: Jahr der Markteinführung
2003
Unterschiede: Schnittstelle
PCI
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
debian_7
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
3.2.0-4-686-pae
Unterschiede: Funktioniert mit Freie Software?
yes
Unterschiede: Verwendete Freie Firmware/Treiber
e100
Unterschiede: Beschreibung
~# lspci -d 8086:1051 -vnn
[code]
03:08.0 Ethernet controller [0200]: Intel Corporation 82801EB/ER (ICH5/ICH5R) integrated LAN Controller [8086:1051] (rev 02)
Subsystem: Fujitsu Technology Solutions Device [1734:101a]
Flags: bus master, medium devsel, latency 66, IRQ 20
Memory at e2005000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 2
Kernel driver in use: e100
[/code]
~# hwinfo --pci
[code]
25: PCI 308.0: 0200 Ethernet controller
[Created at pci.318]
Unique ID: rBUF.yUgdHGRj4GD
Parent ID: 6NW+.c7JTK_YUBi2
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:08.0
SysFS BusID: 0000:03:08.0
Hardware Class: network
Model: "Intel 82801EB/ER (ICH5/ICH5R) integrated LAN Controller"
Vendor: pci 0x8086 "Intel Corporation"
Device: pci 0x1051 "82801EB/ER (ICH5/ICH5R) integrated LAN Controller"
SubVendor: pci 0x1734 "Fujitsu Siemens Computers"
SubDevice: pci 0x101a
Revision: 0x02
Driver: "e100"
Driver Modules: "e100"
Device File: eth0
Memory Range: 0xe2005000-0xe2005fff (rw,non-prefetchable)
I/O Ports: 0x3000-0x3fff (rw)
IRQ: 20 (15691 events)
HW Address: 00:30:05:89:dd:f4
Link detected: yes
Module Alias: "pci:v00008086d00001051sv00001734sd0000101Abc02sc00i00"
Driver Info #0:
Driver Status: e100 is active
Driver Activation Cmd: "modprobe e100"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #18 (PCI bridge)
[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
