Brooktree-Corporation

Brooktree Corporation Bt878 Video Capture (rev 11)

PixelView PV-M4900 FM.RC (video capture device)
Brooktree Corporation Bt878 Audio Capture (rev 11)
LeadTek Research Inc. Bt878 Video Capture
LeadTek Research Inc. Bt878 Audio Capture

109e:036e

not-specified 2006

PCI

parabola, trisquel_5_0

5.4.2-gnu-1, 2.6.38-11-generic

yes

bttv

lspci -nnpk
[code]03:04.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)[/code]

lspci -vmmnn
[code]Slot: 03:04.0
Class: Multimedia video controller [0400]
Vendor: Brooktree Corporation [109e]
Device: Bt878 Video Capture [036e]
Rev: 02
[/code]

lspci -v
[code]03:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 169
Memory at fc001000 (32-bit, prefetchable) [size=4K]
Kernel driver in use: bttv
Kernel modules: bttv
[/code]
[p]Dual card with both Audio and Video separated in two. Doesn't work on parabola because the bttv module is not present in linux-libre which is probably the cause of the IO error in lspci.[/p]
[p]lspci -vvnnk[/p]
[code]03:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
Subsystem: LeadTek Research Inc. Bt878 Video Capture [107d:6609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 15
Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
Not readable
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

03:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
Subsystem: LeadTek Research Inc. Bt878 Audio Capture [107d:6609]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 15
Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K]
Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
Not readable
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

[/code]
[p]hwinfo --tv[/p]
[code]08: PCI 302.0: 11200 TV Card
[Created at pci.386]
Unique ID: 08OF.peMDrNNcLvF
Parent ID: 6NW+.RlqjBL7v2IB
SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0
SysFS BusID: 0000:03:02.0
Hardware Class: tv card
Model: "Brooktree Bt878"
Vendor: pci 0x109e "Brooktree Corporation"
Device: pci 0x036e "Bt878"
SubVendor: pci 0x107d "LeadTek Research Inc."
SubDevice: pci 0x6609
Revision: 0x11
Memory Range: 0xfdffe000-0xfdffefff (ro,non-prefetchable)
IRQ: 15 (no events)
Module Alias: "pci:v0000109Ed0000036Esv0000107Dsd00006609bc04sc00i00"
Driver Info #0:
Driver Status: bttv is not active
Driver Activation Cmd: "modprobe bttv"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #9 (PCI bridge)[/code]