Home » Hardware » wifi cards » Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887]
wifi card Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887]
Modell: Linksys WUSB54AG 802.11a/g Adapter [Intersil IS L3887](Modell-ID: 2021)
Andere mögliche Gerätenamen:
Linksys Wireless A/G USB Network Adapter
Hersteller:
Linksys
Hersteller-ID:Produkt-ID des Gerätes:
13b1:000c
Jahr der Markteinführung:
2004
Schnittstelle:
USB
überprüft mit Distribution:
Trisquel 8.0 Flidas
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
4.4.0-141-generic
Funktioniert mit Freie Software?
Nein
Verwendete Freie Firmware/Treiber:
Beschreibung:
lsusb:
Bus 001 Device 006: ID 13b1:000c Linksys WUSB54AG 802.11a/g Adapter [Intersil ISL3887]
The 13b1:000c Linksys WUSB54AG 802.11a/g Adapter [Intersil ISL3887] DOES NOT WORK with free software because the p54usb driver requires non-free firmware to support this device. After connecting this device, no new network interface appears. Kernel log excerpt from Trisquel GNU/Linux 8/Flidas is reproduced below:
localhost kernel: [   80.624018] usb 1-7: new high-speed USB device number 6 using ehci-pci
localhost kernel: [   80.760762] usb 1-7: New USB device found, idVendor=13b1, idProduct=000c
localhost kernel: [   80.760767] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
localhost kernel: [   80.760771] usb 1-7: Product: Wireless A/G USB Network Adapter
localhost kernel: [   80.760775] usb 1-7: Manufacturer: Cisco Linksys
localhost kernel: [   81.048018] usb 1-7: reset high-speed USB device number 6 using ehci-pci
localhost kernel: [   81.180565] usb 1-7: Loading firmware file /*(DEBLOBBED)*/
localhost kernel: [   81.180570] 1-7: Missing Free firmware (non-Free firmware loading is disabled)
localhost kernel: [   81.180625] usb 1-7: (p54usb) cannot load firmware /*(DEBLOBBED)*/ (-22)!
localhost kernel: [   81.180686] p54usb: probe of 1-7:1.0 failed with error -22
localhost kernel: [   81.180732] usbcore: registered new interface driver p54usb
localhost kernel: [   81.181521] usb 1-7: Direct firmware load failed with error -2
This device DOES NOT work with free software. Weighing only a few grams, it is neither heavy enough to make a good paperweight.

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information