Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Linksys
differences in the entry: model name
Linksys WUSBF54G v1.1 802.11bg
differences in the entry: possible other names of the device
differences in the entry: VendorID:ProductID code of the device
13b1:0024
differences in the entry: year of commercialization
2005
differences in the entry: interface
USB
differences in the entry: GNU/Linux distribution used for the test
trisquel_7_0 , trisquel_8_0
differences in the entry: tested with the following kernel libre
3.13.0-39-lowlatency
differences in the entry: does it work with free software?
no
differences in the entry: free driver used
differences in the entry: Description
Trisquel mini 7.0 LTS Belenos (Desktop is LXDE): NOK, device not detected as a new wireless device.
[h1]Detailed Information[/h1]
[b]lsusb -vmm[/b]
[b]lsusb[/b]
[code]lsusb
Bus 001 Device 005: ID 13b1:0024 Linksys WUSBF54G v1.1 802.11bg
[/code]
[b]lsusb -v[/b]
[code]lsusb
Bus 001 Device 005: ID 13b1:0024 Linksys WUSBF54G v1.1 802.11bg
Couldn't open device, some information will be missing
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 255 Vendor Specific Class
bDeviceSubClass 255 Vendor Specific Subclass
bDeviceProtocol 255 Vendor Specific Protocol
bMaxPacketSize0 64
idVendor 0x13b1 Linksys
idProduct 0x0024 WUSBF54G v1.1 802.11bg
bcdDevice 48.02
iManufacturer 16
iProduct 32
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x04 EP 4 OUT
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
[/code]
[b]hwinfo --usb[/b]
[code]03: USB 00.0: 0200 Ethernet controller
[Created at usb.122]
Unique ID: Uc5H.8QyTBAPUVZB
Parent ID: k4bc.2DFUsyrieMD
SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0
SysFS BusID: 1-4:1.0
Hardware Class: network
Model: "Linksys WUSBF54G v1.1 802.11bg"
Hotplug: USB
Vendor: usb 0x13b1 "Linksys"
Device: usb 0x0024 "WUSBF54G v1.1 802.11bg"
Revision: "48.02"
Driver: "zd1211rw"
Driver Modules: "zd1211rw"
Device File: wlx0018f8d01dc4
Speed: 480 Mbps
HW Address: 00:18:f8:d0:1d:c4
Link detected: no
Module Alias: "usb:v13B1p0024d4802dcFFdscFFdpFFicFFisc00ip00in00"
Driver Info #0:
Driver Status: zd1211rw is active
Driver Activation Cmd: "modprobe zd1211rw"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #2 (Hub)
[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
