Differences between the revision of 15:14, 3 August 2018, created by dadu33, and the revision of 15:12, 3 August 2018
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
Guillemot-Corp.
Unterschiede: Modellbezeichnung
Hercules HWNUp-150 802.11n Wireless N Pico [Realtek RTL8188CUS]
Unterschiede: Andere mögliche Gerätenamen
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
06f8:e033
Unterschiede: Jahr der Markteinführung
2010
Unterschiede: Schnittstelle
USB
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
trisquel_8_0
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
4.4.0-130-generic
Unterschiede: Funktioniert mit Freie Software?
yes
Unterschiede: Verwendete Freie Firmware/Treiber
rtl8192cu
Unterschiede: Beschreibung
[h1]Unstable[/h1]
(Same issue with 2 devices) The connection is very unstable : it disconnects after some minutes. Then I need to disable the wifi and re-activate it to be able to browse the web again, until the next time some minutes later.

[h1]Details[/h1]

[b]lsusb[/b]
[code]Bus 001 Device 002: ID 06f8:e033 Guillemot Corp. Hercules HWNUp-150 802.11n Wireless N Pico [Realtek RTL8188CUS]
[/code]


[b]lsusbiwconfig | grep Power[/b]
[code]
lo no wireless extensions.

enp4s0f1 no wireless extensions.

Bit Rate=72.2 Mb/s Tx-Power=20 dBm
Power Management:off

[/code]

[b]sudo lsusb -v[/b]
[code]
Bus 001 Device 004: ID 06f8:e033 Guillemot Corp. Hercules HWNUp-150 802.11n Wireless N Pico [Realtek RTL8188CUS]
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x06f8 Guillemot Corp.
idProduct 0xe033 Hercules HWNUp-150 802.11n Wireless N Pico [Realtek RTL8188CUS]
bcdDevice 2.00
iManufacturer 1 Realtek
iProduct 2 802.11n WLAN Adapter
iSerial 3 00e04c000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 255 Vendor Specific Subclass
bInterfaceProtocol 255 Vendor Specific Protocol
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information