Differences between the revision of 10:59, 6 February 2020, created by parajh7, and the revision of 03:49, 12 August 2018
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
Unterschiede: Hersteller
NVIDIA-Corporation
Unterschiede: Modellbezeichnung
NVIDIA Corporation C79 [GeForce 9200M G] (rev b1)
Unterschiede: Andere mögliche Gerätenamen
Fujitsu Technology Solutions MCP79 [GeForce 8200M G]
ASUSTek C79 [GeForce 9200M G]
Unterschiede: Hersteller-ID:Produkt-ID des Gerätes
10de:086f
Unterschiede: Jahr der Markteinführung
2008
Unterschiede: Schnittstelle
not-specified
Unterschiede: Verwendete GNU/Linux-Distribution für die Überprüfung
parabola, trisquel_5_5
Unterschiede: Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel)
5.4.12-gnu-1, 3.0.0-17-generic
Unterschiede: Funktioniert einwandfrei mit Freie Software?
works_with_3D
Unterschiede: Verwendete Freie Firmware/Treiber
nouveau
Unterschiede: Beschreibung
[p][b]9200M[/b][/p]
[p]lspci -vmmnn[/p]
[code]
Slot: 02:00.0
Class: VGA compatible controller [0300]
Vendor: NVIDIA Corporation [10de]
Device: C79 [GeForce 9200M G] [086f]
SVendor: ASUSTeK Computer Inc. [1043]
SDevice: Device [16b2]
Rev: b1
[/code]

[p]lspci -nnk[/p]
[code]
02:00.0 VGA compatible controller [0300]: NVIDIA Corporation C79 [GeForce 9200M G] [10de:086f] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:16b2]
Kernel driver in use: nouveau
Kernel modules: nouveau, nvidiafb
[/code]
[p][b]8200M[/b][/p]
[p]It works, both the framebuffer and X11 but as soon as an OpenGL call is made, it freezes the whole laptop completly. It looks like a hardware problem or a bug with the driver wrongly assuming it's a 9200M since it has the same vendor ID.[/p]
[p]lspci -vvnnk[/p]
[code]02:00.0 VGA compatible controller [0300]: NVIDIA Corporation MCP79 [GeForce 8200M G] [10de:086f] (rev b1) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions MCP79 [GeForce 8200M G] [1734:1151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at cc000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 4000 [size=128]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee01004 Data: 4028
Kernel driver in use: nouveau
Kernel modules: nouveau[/code]
[p]hwinfo[/p]
[code]16: PCI 200.0: 0300 VGA compatible controller (VGA)
[Created at pci.386]
Unique ID: B35A.A+EkLoYjeHC
Parent ID: 37TO.rhOQxRJg2zB
SysFS ID: /devices/pci0000:00/0000:00:10.0/0000:02:00.0
SysFS BusID: 0000:02:00.0
Hardware Class: graphics card
Model: "nVidia MCP79 [GeForce 8200M G]"
Vendor: pci 0x10de "nVidia Corporation"
Device: pci 0x086f "MCP79 [GeForce 8200M G]"
SubVendor: pci 0x1734 "Fujitsu Technology Solutions"
SubDevice: pci 0x1151
Revision: 0xb1
Driver: "nouveau"
Driver Modules: "nouveau"
Memory Range: 0xcc000000-0xccffffff (rw,non-prefetchable)
Memory Range: 0xd0000000-0xdfffffff (ro,non-prefetchable)
Memory Range: 0xce000000-0xcfffffff (ro,non-prefetchable)
I/O Ports: 0x4000-0x4fff (rw)
Memory Range: 0x000c0000-0x000dffff (rw,non-prefetchable,disabled)
IRQ: 29 (8330 events)
I/O Ports: 0x3c0-0x3df (rw)
Module Alias: "pci:v000010DEd0000086Fsv00001734sd00001151bc03sc00i00"
Driver Info #0:
Driver Status: nouveau is active
Driver Activation Cmd: "modprobe nouveau"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #15 (PCI bridge)[/code]
[p]dmesg[/p]
[code][ 10.398098] PCI Interrupt Link [LGPU] enabled at IRQ 22
[ 10.398214] nouveau 0000:02:00.0: NVIDIA MCP79/MCP7A (0ac780b1)
[ 10.417305] nouveau 0000:02:00.0: bios: version 62.79.38.00.17
[ 10.438209] nouveau 0000:02:00.0: fb: 128 MiB stolen system memory
[ 10.515566] [TTM] Zone kernel: Available graphics memory: 438278 KiB
[ 10.515568] [TTM] Initializing pool allocator
[ 10.515574] [TTM] Initializing DMA pool allocator
[ 10.515593] nouveau 0000:02:00.0: DRM: VRAM: 128 MiB
[ 10.515595] nouveau 0000:02:00.0: DRM: GART: 1048576 MiB
[ 10.515600] nouveau 0000:02:00.0: DRM: TMDS table version 2.0
[ 10.515602] nouveau 0000:02:00.0: DRM: DCB version 4.0
[ 10.515605] nouveau 0000:02:00.0: DRM: DCB outp 00: 01020323 00010034
[ 10.515607] nouveau 0000:02:00.0: DRM: DCB outp 01: 02001300 0000001e
[ 10.515609] nouveau 0000:02:00.0: DRM: DCB outp 02: 02012332 00020010
[ 10.515612] nouveau 0000:02:00.0: DRM: DCB conn 00: 00000040
[ 10.515614] nouveau 0000:02:00.0: DRM: DCB conn 01: 00000100
[ 10.515615] nouveau 0000:02:00.0: DRM: DCB conn 02: 00001261
[ 10.518174] nouveau 0000:02:00.0: DRM: MM: using M2MF for buffer copies
[ 10.518757] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.518758] [drm] Driver supports precise vblank timestamp query.
[ 10.559432] nouveau 0000:02:00.0: DRM: allocated 1280x800 fb: 0x50000, bo 000000000c1bbc99
[ 10.559613] fbcon: nouveaudrmfb (fb0) is primary device[/code]

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information