Home » Hardware » 3G-cards » ZTE WCDMA Technologies MSM
3G-card ZTE WCDMA Technologies MSM
model: ZTE WCDMA Technologies MSM(model id: 1358)
possible other names of the device:
ZTE MF195E
DigiNet Mobil 21.6 Mbps
vendor:
ZTE WCDMA Technologies MSM
VendorID:ProductID code of the device:
19d2:1514
year of commercialization:
2014
interface:
USB
tested on:
Trisquel 6.0 Toutatis
tested with the following kernel libre:
3.2.0-38-generic-pae
does it work with free software?
no
free driver used:
Description:
Stock DIGI net mobil USB dongles, 21.6 Mbps, distributed by RCS-RDS Romania http://www.rcs-rds.ro to its residential clients (BLUE modem). At the time of the test (April 29th, 2014), it probably doesn't work just because is „seen” as a mass storage device, not USB modem (in usb_modeswitch).

lsusb

Bus 001 Device 003: ID 19d2:1514 ZTE WCDMA Technologies MSM

lsusb -v

Bus 001 Device 003: ID 19d2:1514 ZTE WCDMA Technologies MSM 
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  idVendor           0x19d2 ZTE WCDMA Technologies MSM
  idProduct          0x1514 
  bcdDevice            0.01
  iManufacturer           2 ZTE
  iProduct                1 MF195E
  iSerial                 3 AF7C136E43254C7846BA6FD2952C656312144268
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0x80
      (Bus Powered)
    MaxPower              500mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass         8 Mass Storage
      bInterfaceSubClass      6 SCSI
      bInterfaceProtocol     80 Bulk-Only
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0200  1x 512 bytes
        bInterval               0
Device Qualifier (for other device speed):
  bLength                10
  bDescriptorType         6
  bcdUSB               2.00
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0 
  bDeviceProtocol         0 
  bMaxPacketSize0        64
  bNumConfigurations      1
Device Status:     0x0000
  (Bus Powered)

dmesg

[  921.920022] usb 1-5: new high-speed USB device number 6 using ehci_hcd
[  922.064968] scsi10 : usb-storage 1-5:1.0
[  923.066257] scsi 10:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  0001 PQ: 0 ANSI: 0
[  923.066744] scsi 10:0:0:1: Direct-Access     ZTE      ZTE Storage      0001 PQ: 0 ANSI: 0[  921.920022] usb 1-5: new high-speed USB device number 6 using ehci_hcd
[  922.064968] scsi10 : usb-storage 1-5:1.0
[  923.066257] scsi 10:0:0:0: CD-ROM            ZTE      USB SCSI CD-ROM  0001 PQ: 0 ANSI: 0
[  923.066744] scsi 10:0:0:1: Direct-Access     ZTE      ZTE Storage      0001 PQ: 0 ANSI: 0
[  923.076127] sr0: scsi3-mmc drive: 0x/0x caddy
[  923.076406] sr 10:0:0:0: Attached scsi CD-ROM sr0
[  923.076651] sr 10:0:0:0: Attached scsi generic sg0 type 5
[  923.077134] sd 10:0:0:1: Attached scsi generic sg1 type 0
[  923.079014] sd 10:0:0:1: [sda] Attached SCSI removable disk
[  923.177530] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
[  923.177547] sr: Sense Key : Hardware Error [current] 
[  923.177552] sr: Add. Sense: No additional sense information
[  923.293526] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[  923.293543] sr: Sense Key : Hardware Error [current] 
[  923.293548] sr: Add. Sense: No additional sense information
[  923.554162] ISO 9660 Extensions: Microsoft Joliet Level 1
[  923.557179] ISOFS: changing to secondary root
[  923.076127] sr0: scsi3-mmc drive: 0x/0x caddy
[  923.076406] sr 10:0:0:0: Attached scsi CD-ROM sr0
[  923.076651] sr 10:0:0:0: Attached scsi generic sg0 type 5
[  923.077134] sd 10:0:0:1: Attached scsi generic sg1 type 0
[  923.079014] sd 10:0:0:1: [sda] Attached SCSI removable disk
[  923.177530] sr0: CDROM (ioctl) error, command: Get event status notification 4a 01 00 00 10 00 00 00 08 00
[  923.177547] sr: Sense Key : Hardware Error [current] 
[  923.177552] sr: Add. Sense: No additional sense information
[  923.293526] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00
[  923.293543] sr: Sense Key : Hardware Error [current] 
[  923.293548] sr: Add. Sense: No additional sense information
[  923.554162] ISO 9660 Extensions: Microsoft Joliet Level 1
[  923.557179] ISOFS: changing to secondary root

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information