Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Yamaha-Corporation
differences in the entry: model name
Yamaha YMF713E-S
differences in the entry: possible other names of the device
Yamaha OPL3-SAX Sound Board
Yamaha OPL3-SA2
Yamaha OPL3-SA3
Yamaha YMF711
Yamaha YMF715-F Sound Board
Yamaha YMF715
differences in the entry: VendorID:ProductID code of the device
1073:0020
differences in the entry: year of commercialization
1996
differences in the entry: interface
ISA
differences in the entry: GNU/Linux distribution used for the test
parabola
differences in the entry: tested with the following kernel libre
5.3.8-gnu-1 5.5.6-gnu-1
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
snd-opl3sa2
differences in the entry: Description
[b][p]YMF719E-S[/p][/b]
[p]Two cards were tested, both work but the driver needs to be modprobed first[/p] first, just like all ISA cards.[/p]
[code]modprobe snd-opl3sa2[/code]
[p]hwinfo --verbose --sound[/p]
[code]23: ISA(PnP) 01.0: 0401 Multimedia audio controller
[Created at isapnp.142]
Unique ID: R_Yp.JbMwFrlQQUC
SysFS ID: /devices/pnp1/01:01/01:01.00
SysFS BusID: 01:01.00
Hardware Class: sound
Model: "Yamaha OPL3-SAX Sound Board"
Vendor: YMH "Yamaha"
Device: eisa 0x0020 "OPL3-SAX Sound Board"
SubVendor: YMH "Yamaha"
SubDevice: eisa 0x0021
Driver Info #0:
Driver Status: snd-opl3sa2 is active
Driver Activation Cmd: "modprobe snd-opl3sa2"
Config Status: cfg=new, avail=yes, need=no, active=unknown[/code]
[p]dmesg[/p]
[code][ 220.222017] snd-opl3sa2-pnpbios 01:01.00: [io 0x0220-0x022f]
[ 220.222047] snd-opl3sa2-pnpbios 01:01.00: [io 0x0530-0x0537]
[ 220.222070] snd-opl3sa2-pnpbios 01:01.00: [io 0x0388-0x038b]
[ 220.222092] snd-opl3sa2-pnpbios 01:01.00: [io 0x0330-0x0331]
[ 220.222122] snd-opl3sa2-pnpbios 01:01.00: [io 0x0240-0x024f]
[ 220.222145] snd-opl3sa2-pnpbios 01:01.00: [io 0x0e80-0x0e87]
[ 220.222166] snd-opl3sa2-pnpbios 01:01.00: [io 0x0388-0x038b]
[ 220.222189] snd-opl3sa2-pnpbios 01:01.00: [io 0x0300-0x0301]
[ 220.222210] snd-opl3sa2-pnpbios 01:01.00: [io 0x0100-0x0101]
[ 220.222335] snd-opl3sa2-pnpbios 01:01.00: [irq 5]
[ 220.222355] snd-opl3sa2-pnpbios 01:01.00: [dma 1]
[ 220.222371] snd-opl3sa2-pnpbios 01:01.00: [dma 3]
[ 220.228403] snd-opl3sa2-pnpbios 01:01.00: activated
[ 220.228454] snd-opl3sa2-pnpbios: probe of 01:01.00 failed with error -2
[ 220.234364] snd-opl3sa2-cpnp 01:01.00: disabled
[ 220.234671] snd-opl3sa2-cpnp 01:01.00: [io 0x0220-0x022f]
[ 220.234699] snd-opl3sa2-cpnp 01:01.00: [io 0x0530-0x0537]
[ 220.234721] snd-opl3sa2-cpnp 01:01.00: [io 0x0388-0x038b]
[ 220.234743] snd-opl3sa2-cpnp 01:01.00: [io 0x0330-0x0331]
[ 220.234774] snd-opl3sa2-cpnp 01:01.00: [io 0x0240-0x024f]
[ 220.234796] snd-opl3sa2-cpnp 01:01.00: [io 0x0e80-0x0e87]
[ 220.234817] snd-opl3sa2-cpnp 01:01.00: [io 0x0388-0x038b]
[ 220.234839] snd-opl3sa2-cpnp 01:01.00: [io 0x0300-0x0301]
[ 220.234861] snd-opl3sa2-cpnp 01:01.00: [io 0x0100-0x0101]
[ 220.234981] snd-opl3sa2-cpnp 01:01.00: [irq 5]
[ 220.235002] snd-opl3sa2-cpnp 01:01.00: [dma 1]
[ 220.235017] snd-opl3sa2-cpnp 01:01.00: [dma 3]
[ 220.240649] snd-opl3sa2-cpnp 01:01.00: activated
[ 220.250936] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 220.260922] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 220.270951] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 220.280949] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[ 220.290969] SA sound/isa/wss/wss_lib.c:447 mce_down - exit = 0xb
[/code]
[b][p]YMF715F-S[/p][/b]
[p]Sampling rate above 44100hz produces glitched sounds, but still works.[/p]
[code]23: ISA(PnP) 01.0: 0401 Multimedia audio controller
[Created at isapnp.142]
Unique ID: R_Yp.JbMwFrlQQUC
SysFS ID: /devices/pnp1/01:01/01:01.00
SysFS BusID: 01:01.00
Hardware Class: sound
Model: "Yamaha OPL3-SA3 Sound Board"
Vendor: YMH "Yamaha"
Device: eisa 0x0020 "OPL3-SA3 Sound Board"
SubVendor: YMH "Yamaha"
SubDevice: eisa 0x0021
Driver Info #0:
Driver Status: snd-opl3sa2 is active
Driver Activation Cmd: "modprobe snd-opl3sa2"
Config Status: cfg=new, avail=yes, need=no, active=unknown[/code]
The contents of this page are in the Public Domain. (see the
CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
