Canon-Inc.

Canon, Inc.

Canon PIXMA iP2820

inkjet

04a9:10e4

2015

USB

trisquel_8_0

B-Partial

no

4.4.0-119-generic

CUPS 2.1.3-4ubuntu0.4 + Gutenprint 5.2.11

[p]Experiment
support for the Canon PIXMA iP2820 was added in version 5.2.11 of
Gutenprint. This version of Gutenprint first appeared in Debian 9
Stretch and Trisquel 8 Flidas.[/p]

Why only a 'B-Partial' rating:
[list]
[*] Anything below ~16mm from the bottom of a Letter size page gets
consistently cut off in my tests. I can print as close as 4mm to the
left and right sides of the page and as close as ~3.5mm to the top of
the page.[/*]
[*] Ink level reporting does not work.[/*]
[*] This model is only experimentally supported by Gutenprint.[/*]
[/list]

[p]According to the printer test page the PPD file in use is
STP00079.PPD.[/p]

# lsusb -v
[code]
Bus 002 Device 005: ID 04a9:10e4 Canon, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x04a9 Canon, Inc.
idProduct 0x10e4
bcdDevice 1.01
iManufacturer 1 Canon
iProduct 2 iP2800 series
iSerial 3 D3F190
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 2mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 7 Printer
bInterfaceSubClass 1 Printer
bInterfaceProtocol 2 Bidirectional
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0001
Self Powered
[/code]

# hwinfo --usb
[code]
05: USB 00.0: 10900 Printer
[Created at usb.122]
Unique ID: JPTW.WhDyV5klE05
Parent ID: FKGF.0j9+vWlqL56
SysFS ID: /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0
SysFS BusID: 2-1.3:1.0
Hardware Class: printer
Model: "Canon iP2800 series"
Hotplug: USB
Vendor: usb 0x04a9 "Canon"
Device: usb 0x10e4 "iP2800 series"
Revision: "1.01"
Serial ID: "D3F190"
Driver: "usblp"
Driver Modules: "usblp"
Speed: 480 Mbps
Module Alias: "usb:v04A9p10E4d0101dc00dsc00dp00ic07isc01ip02in00"
Driver Info #0:
Driver Status: usblp is active
Driver Activation Cmd: "modprobe usblp"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #11 (Hub)
[/code]