Home » Hardware » host controller » PCI 9815 Multi-I/O Controller
host controller PCI 9815 Multi-I/O Controller
modello: PCI 9815 Multi-I/O Controller (id del modello: 1997)
eventuali altri nomi del dispositivo:
MCS9805
MCS9815
MCS9820
MCS9835
MCS9845
LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
marca:
MosChip Semiconductor Technology Ltd.
sottotipo (PCMCIA, USB, Firewire, HECI):
Controller PCMCIA
codice VendorID:ProductID del prodotto:
9710:9815
anno di commercializzazione:
non specificato
interfaccia:
PCI
testato con:
Debian GNU/Linux Testing/Unstable
testato con il seguente kernel libre:
4.19.0-arch1-1-ARCH
funziona con il software libero?
driver liberi usati:
parport_pc
Descrizione:
MCS9805, MCS9815, MCS9820, MCS9835 and MCS9845 PCI Serial / Parallel ports on Linux platform.

Specific options must sometimes be passed to the parport_pc driver using modprobe in order for the card to work properly. See the following PDF for detailed instructions: http://www.asix.com.tw/FrootAttach/driver/MCS98xx_Linux_Driver_Installation_Guide_v100.pdf

To get this driver working I needed to get port addresses using lspci

#lspci -v
04:04.0 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9815 Multi-I/O Controller (rev 01)
	Subsystem: LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
	Flags: medium devsel, IRQ 7
	I/O ports at c050 [size=8]
	I/O ports at c040 [size=8]
	I/O ports at c030 [size=8]
	I/O ports at c020 [size=8]
	I/O ports at c010 [size=8]
	I/O ports at c000 [size=16]
	Kernel modules: parport_pc
I then made a file inside /etc/modprobe.d that passes specific addresses into the driver at each boot
/etc/modprobe.d/01-MCS98XX.CONF:
#
# Special settings for the MCS98xx parallel driver to work correctly
#
###########################################################################

options parport_pc io=0x378,0xc050,0xc030 irq=4,18,18


Write below your motivation

I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information