Home » Hardware » host controllers » PCI 9815 Multi-I/O Controller
host controller PCI 9815 Multi-I/O Controller
Μοντέλο: PCI 9815 Multi-I/O Controller (Κωδικός id του μοντέλου: 1997)
Άλλα πιθανά ονόματα της συσκευής:
MCS9805
MCS9815
MCS9820
MCS9835
MCS9845
LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
Κατασκευαστής:
MosChip Semiconductor Technology Ltd.
Υποτύπος (PCMCIA, USB, Firewire, HECI):
PCMCIA Controller
Κωδικός Κατασκευαστή:Κωδικός Προϊόντος:
9710:9815
Έτος εμπορικής κυκλοφορίας:
μη-διευκρινισμένο
Διεπαφή:
PCI
Δοκιμάσθηκε με:
Debian GNU/Linux Testing/Unstable
Δοκιμάσθηκε με τον εξής ελεύθερο πυρήνα:
4.19.0-arch1-1-ARCH
Λειτουργεί με ελεύθερο λογισμικό;
Ναι
Ελεύθεροι οδηγοί/driver που χρησιμοποιήθηκαν:
parport_pc
Περιγραφή:
MCS9805, MCS9815, MCS9820, MCS9835 and MCS9845 PCI Serial / Parallel ports on Linux platform.

Specific options must sometimes be passed to the parport_pc driver using modprobe in order for the card to work properly. See the following PDF for detailed instructions: http://www.asix.com.tw/FrootAttach/driver/MCS98xx_Linux_Driver_Installation_Guide_v100.pdf

To get this driver working I needed to get port addresses using lspci

#lspci -v
04:04.0 Communication controller: MosChip Semiconductor Technology Ltd. PCI 9815 Multi-I/O Controller (rev 01)
	Subsystem: LSI Logic / Symbios Logic 2P0S (2 port parallel adaptor)
	Flags: medium devsel, IRQ 7
	I/O ports at c050 [size=8]
	I/O ports at c040 [size=8]
	I/O ports at c030 [size=8]
	I/O ports at c020 [size=8]
	I/O ports at c010 [size=8]
	I/O ports at c000 [size=16]
	Kernel modules: parport_pc
I then made a file inside /etc/modprobe.d that passes specific addresses into the driver at each boot
/etc/modprobe.d/01-MCS98XX.CONF:
#
# Special settings for the MCS98xx parallel driver to work correctly
#
###########################################################################

options parport_pc io=0x378,0xc050,0xc030 irq=4,18,18


Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, version SVN-387, available under the GNU General Public (GPLv3) License.
JavaScript license information