Differences between the revision of 10:47, 8 August 2020, created by parajh7, and the revision of 18:17, 20 July 2017
Notice: the text in red has been deleted from the previous revision, the text in green has been added in this revision and the text in gray has not been changed.
differences in the entry: vendor
Advanced-Micro-Devices-Inc.-AMD-ATI
differences in the entry: model name
SB7x0/SB8x0/SB9x0 USB EHCI Controller
differences in the entry: possible other names of the device
Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller
Hewlett-Packard Company SB7x0/SB8x0/SB9x0 USB EHCI Controller
differences in the entry: subtype (laser, inkjet, ..)
usb-controller
differences in the entry: VendorID:ProductID code of the device
1002:4396
differences in the entry: year of commercialization
not-specified
differences in the entry: interface
not-specified
differences in the entry: GNU/Linux distribution used for the test
trisquel_6_0 , debian_10
differences in the entry: tested with the following kernel libre
3.2.0-48-generic 3.2.0-48-generic, 4.19.0-9-amd64
differences in the entry: does it work with free software?
yes
differences in the entry: free driver used
differences in the entry: Description
[p]lspci -vvnnk[/p]
[code]00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company SB7x0/SB8x0/SB9x0 USB EHCI Controller [103c:142c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
NUMA node: 0
Region 0: Memory at 94404000 (32-bit, non-prefetchable) [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Bridge: PM- B3+
Capabilities: [e4] Debug port: BAR=1 offset=00e0
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
[/code]
The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information