Home » Hardware » lettori di impronte digitali » VFS5011 Fingerprint Reader
lettore di impronte digitali VFS5011 Fingerprint Reader
modello: VFS5011 Fingerprint Reader(id del modello: 1878)
marca:
Validity Sensors, Inc.
codice VendorID:ProductID del prodotto:
138a:0011
anno di commercializzazione:
non specificato
interfaccia:
USB
testato con:
Parabola GNU/Linux
testato con il seguente kernel libre:
4.8.6-gnu-1
funziona con il software libero?
driver liberi usati:
Descrizione:
# lsusb

Bus 001 Device 006: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
# lsusb -v

Bus 001 Device 006: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass        17 
  bDeviceProtocol       255 
  bMaxPacketSize0         8
  idVendor           0x138a Validity Sensors, Inc.
  idProduct          0x0011 VFS5011 Fingerprint Reader
  bcdDevice            0.78
  iManufacturer           0 
  iProduct                0 
  iSerial                 1 97f9a15c1b8a
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               4
Device Status:     0x0000
  (Bus Powered)
# hwinfo --usb

11: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: zFuK.XsLo5XeahZA
  Parent ID: k4bc.2DFUsyrieMD
  SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0
  SysFS BusID: 1-8:1.0
  Hardware Class: unknown
  Model: "Validity Sensors VFS5011 Fingerprint Reader"
  Hotplug: USB
  Vendor: usb 0x138a "Validity Sensors, Inc."
  Device: usb 0x0011 "VFS5011 Fingerprint Reader"
  Revision: "0.78"
  Serial ID: "97f9a15c1b8a"
  Speed: 12 Mbps
  Module Alias: "usb:v138Ap0011d0078dcFFdsc11dpFFicFFisc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (Hub)

Write below your motivation

I contenuti di questa pagina sono di Pubblico Dominio. (leggi la pagina CC0 per informazioni dettagliate). Chiunque è libero di copiare, modificare, pubblicare, usare, vendere, o distribuire tale contenuto per qualsiasi fine, commerciale o non commerciale, e con ogni mezzo.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information