Home » Hardware » fingerprint readers » VFS5011 Fingerprint Reader
fingerprint reader VFS5011 Fingerprint Reader
model: VFS5011 Fingerprint Reader(model id: 1878)
vendor:
Validity Sensors, Inc.
VendorID:ProductID code of the device:
138a:0011
year of commercialization:
not-specified
interface:
USB
tested on:
Parabola GNU/Linux
tested with the following kernel libre:
4.8.6-gnu-1
does it work with free software?
yes
free driver used:
Description:
# lsusb

Bus 001 Device 006: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
# lsusb -v

Bus 001 Device 006: ID 138a:0011 Validity Sensors, Inc. VFS5011 Fingerprint Reader
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass        17 
  bDeviceProtocol       255 
  bMaxPacketSize0         8
  idVendor           0x138a Validity Sensors, Inc.
  idProduct          0x0011 VFS5011 Fingerprint Reader
  bcdDevice            0.78
  iManufacturer           0 
  iProduct                0 
  iSerial                 1 97f9a15c1b8a
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           46
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           4
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass      0 
      bInterfaceProtocol      0 
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x01  EP 1 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x83  EP 3 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               4
Device Status:     0x0000
  (Bus Powered)
# hwinfo --usb

11: USB 00.0: 0000 Unclassified device
  [Created at usb.122]
  Unique ID: zFuK.XsLo5XeahZA
  Parent ID: k4bc.2DFUsyrieMD
  SysFS ID: /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0
  SysFS BusID: 1-8:1.0
  Hardware Class: unknown
  Model: "Validity Sensors VFS5011 Fingerprint Reader"
  Hotplug: USB
  Vendor: usb 0x138a "Validity Sensors, Inc."
  Device: usb 0x0011 "VFS5011 Fingerprint Reader"
  Revision: "0.78"
  Serial ID: "97f9a15c1b8a"
  Speed: 12 Mbps
  Module Alias: "usb:v138Ap0011d0078dcFFdsc11dpFFicFFisc00ip00in00"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (Hub)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information