Home » Hardware » fingerprint readers » AuthenTec Inc. AES2810
fingerprint reader AuthenTec Inc. AES2810
Modell: AuthenTec Inc. AES2810(Modell-ID: 563)
Hersteller:
AuthenTec, Inc.
Hersteller-ID:Produkt-ID des Gerätes:
08ff:2810
Jahr der Markteinführung:
not-specified
Schnittstelle:
USB
überprüft mit Distribution:
Trisquel 6.0 Toutatis
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
3.11.0-15-generic
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
aes2550
Beschreibung:

libfprint0 in Trisquel 6.0 is too old to support this device. Build it from upstream git using commands like these:

sudo aptitude install git
sudo aptitude build-dep libfprint0
git clone git://anongit.freedesktop.org/libfprint/libfprint
cd libfprint
./autogen.sh --prefix=$HOME/.local
make -j3
make install
And run fprint_demo:
sudo LD_LIBRARY_PATH=$HOME/.local/lib fprint_demo
(or modify the shipped udev rule instead of using sudo). It works.

lsusb:

Bus 001 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810

lsusb -v:

Bus 001 Device 003: ID 08ff:2810 AuthenTec, Inc. AES2810
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          255 Vendor Specific Class
  bDeviceSubClass       255 Vendor Specific Subclass
  bDeviceProtocol       255 Vendor Specific Protocol
  bMaxPacketSize0         8
  idVendor           0x08ff AuthenTec, Inc.
  idProduct          0x2810 AES2810
  bcdDevice           17.03
  iManufacturer           0 
  iProduct                1 
  iSerial                 0 
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           32
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0 
    bmAttributes         0xa0
      (Bus Powered)
      Remote Wakeup
    MaxPower              100mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           2
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              0 
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0008  1x 8 bytes
        bInterval               0

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information