Home » Hardware » cartes ethernet » Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
carte ethernet Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
modèle: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)(ID du modèle: 843)
autres noms possibles du périphérique:
ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
vendeur:
Marvell Technology Group Ltd.
VendorID:ProductID du périphérique:
11ab:4320
année de commercialisation:
2003
interface:
non-spécifié
testé sur:
Parabola GNU/Linux
Trisquel 5.5 Brigantia
testé avec le kernel libre suivant:
5.5.13-gnu-1
3.0.0-17-generic
cela fonctionne-t-il avec le logiciel libre ?
oui
pilote libre utilisé:
skge, sk98lin
Description:

Hwinfo shows that sk98lin (which is missing from linux-libre) has an use for this ethernet device, but works perfectly without it anyway.

lspci -vmmnn

Slot:	02:15.0
Class:	Ethernet controller [0200]
Vendor:	Marvell Technology Group Ltd. [11ab]
Device:	88E8001 Gigabit Ethernet Controller [4320]
SVendor:	Acer Incorporated [ALI] [1025]
SDevice:	Device [0085]
Rev:	13

lspci -nnk

02:15.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: Acer Incorporated [ALI] Device [1025:0085]
	Kernel driver in use: skge
	Kernel modules: skge
lspci -v
05:0c.0 Ethernet controller: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller (rev 13)
	Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus)
	Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17
	Memory at d4014000 (32-bit, non-prefetchable) [size=16K]
	I/O ports at a400 [size=256]
	Expansion ROM at 40000000 [disabled] [size=128K]
	Capabilities: [48] Power Management version 2
	Capabilities: [50] Vital Product Data
	Kernel driver in use: skge

lspci -vvnnk

02:05.0 Ethernet controller [0200]: Marvell Technology Group Ltd. 88E8001 Gigabit Ethernet Controller [11ab:4320] (rev 13)
	Subsystem: ASUSTeK Computer Inc. Marvell 88E8001 Gigabit Ethernet Controller (Asus) [1043:811a]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: Memory at feafc000 (32-bit, non-prefetchable) [size=16K]
	Region 1: I/O ports at d800 [size=256]
	Expansion ROM at feac0000 [disabled] [size=128K]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=7 DScale=1 PME-
	Capabilities: [50] Vital Product Data
		Product Name: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
		Read-only fields:
			[PN] Part number: Yukon 88E8001
			[EC] Engineering changes: Rev. 1.3
			[MN] Manufacture ID: Marvell
			[SN] Serial number: AbCdEfG334454
			[CP] Extended capability: 01 10 cc 03
			[RV] Reserved: checksum good, 10 byte(s) reserved
		Read/write fields:
			[RW] Read-write area: 121 byte(s) free
		End
	Kernel driver in use: skge
	Kernel modules: skge

hwinfo

20: PCI 205.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: uy4f.ku_pZL9tQC3
  Parent ID: 6NW+.c7JTK_YUBi2
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:02:05.0
  SysFS BusID: 0000:02:05.0
  Hardware Class: network
  Model: "ASUSTeK Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
  Vendor: pci 0x11ab "Marvell Technology Group Ltd."
  Device: pci 0x4320 "88E8001 Gigabit Ethernet Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x811a "Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
  Revision: 0x13
  Driver: "skge"
  Driver Modules: "skge"
  Device File: enp2s5
  Memory Range: 0xfeafc000-0xfeafffff (rw,non-prefetchable)
  I/O Ports: 0xd800-0xd8ff (rw)
  Memory Range: 0xfeac0000-0xfeadffff (ro,non-prefetchable,disabled)
  IRQ: 22 (no events)
  HW Address: 00:11:2f:09:e8:29
  Permanent HW Address: 00:11:2f:09:e8:29
  Link detected: no
  Module Alias: "pci:v000011ABd00004320sv00001043sd0000811Abc02sc00i00"
  Driver Info #0:
    Driver Status: sk98lin is not active
    Driver Activation Cmd: "modprobe sk98lin"
  Driver Info #1:
    Driver Status: skge is active
    Driver Activation Cmd: "modprobe skge"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #15 (PCI bridge)

Write below your motivation

Le contenu de cette page est dans le Domaine Public (voir la page CC0 pour plus d'informations). Quiquonque est libre de copier, modifier, publier, utiliser, vendre ou distribuer le texte , quelques soit le but et le moyen.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information