Home » Hardware » ethernet cards » 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
ethernet card 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)
Modell: 3Com Corporation 3c905C-TX/TX-M [Tornado] (rev 74)(Modell-ID: 548)
Andere mögliche Gerätenamen:
Hewlett-Packard Company 3c905C-TX/TX-M [Tornado]
Hersteller:
3Com Corporation
Hersteller-ID:Produkt-ID des Gerätes:
10b7:9200
Jahr der Markteinführung:
not-specified
Schnittstelle:
PCI
überprüft mit Distribution:
Parabola GNU/Linux
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.6.7-gnu-1
5.1.6-gnu-1
2.6.38-11-generic
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
3c59x
Beschreibung:

lspci -nnk

02:03.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
	Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000]
	Kernel driver in use: 3c59x
	Kernel modules: 3c59x

lspci -vmmnn

Slot:	02:03.0
Class:	Ethernet controller [0200]
Vendor:	3Com Corporation [10b7]
Device:	3c905C-TX/TX-M [Tornado] [9200]
SVendor:	3Com Corporation [10b7]
SDevice:	3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [1000]
Rev:	74

lspci -vvnnk

03:02.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 74)
        Subsystem: 3Com Corporation 3C905CX-TX/TX-M Fast Etherlink for PC Management NIC [10b7:1000]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 23
        Region 0: I/O ports at ec00 [size=128]
        Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=128]
        Expansion ROM at febc0000 [disabled] [size=128K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
        Kernel driver in use: 3c59x
        Kernel modules: 3c59x
01:04.0 Ethernet controller [0200]: 3Com Corporation 3c905C-TX/TX-M [Tornado] [10b7:9200] (rev 78)
	Subsystem: Hewlett-Packard Company 3c905C-TX/TX-M [Tornado] [103c:1246]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 80 (2500ns min, 2500ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 5
	Region 0: I/O ports at 2000 [size=128]
	Region 1: Memory at ec100000 (32-bit, non-prefetchable) [size=128]
	Expansion ROM at 10000000 [virtual] [disabled] [size=128K]
	Capabilities: [dc] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: 3c59x
	Kernel modules: 3c59x

hwinfo

20: PCI 104.0: 0200 Ethernet controller
  [Created at pci.386]
  Unique ID: ZSLl.RIV7npLCdHC
  Parent ID: 6NW+.mCtu7+mpnF0
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:01:04.0
  SysFS BusID: 0000:01:04.0
  Hardware Class: network
  Model: "3Com 3c905C-TX/TX-M [Tornado]"
  Vendor: pci 0x10b7 "3Com Corporation"
  Device: pci 0x9200 "3c905C-TX/TX-M [Tornado]"
  SubVendor: pci 0x103c "Hewlett-Packard Company"
  SubDevice: pci 0x1246 
  Revision: 0x78
  Driver: "3c59x"
  Driver Modules: "3c59x"
  Device File: enp1s4
  I/O Ports: 0x2000-0x2fff (rw)
  Memory Range: 0xec100000-0xec10007f (rw,non-prefetchable)
  Memory Range: 0x10000000-0x1001ffff (ro,non-prefetchable,disabled)
  IRQ: 5 (30 events)
  HW Address: 00:01:03:09:0a:3d
  Permanent HW Address: 00:01:03:09:0a:3d
  Link detected: yes
  Module Alias: "pci:v000010B7d00009200sv0000103Csd00001246bc02sc00i00"
  Driver Info #0:
    Driver Status: 3c59x is active
    Driver Activation Cmd: "modprobe 3c59x"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #14 (PCI bridge)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information