Diferencias entre las revisiones de 11:59, 8 Agosto 2020, creado por parajh7, y la revisión de 12:35, 4 Agosto 2019
Nota: el texto en rojo ha sido borrado de la revisión anterior, el texto en verde ha sido agregado en esta revisión y el texto en gris no ha sido cambiado
diferencias en el campo: fabricante
NVIDIA-Corporation
diferencias en el campo: nombre del modelo
NVIDIA Corporation MCP61 Ethernet (rev a2)
diferencias en el campo: otros posibles nombres del dispositivo
Gigabyte Technology Co., Ltd MCP61 Ethernet
diferencias en el campo: código VendorID:ProductID del dispositivo
10de:03ef
diferencias en el campo: año de comercialización
not-specified
diferencias en el campo: interfaz
not-specified
diferencias en el campo: distribución GNU/Linux usada para la prueba
parabola , debian_10
diferencias en el campo: probado con el siguiente kernel libre
5.2.2-gnu-1 5.2.2-gnu-1, 4.19.0-9-amd64
diferencias en el campo: ¿funciona con software libre?
yes
diferencias en el campo: driver libre usado
forcedeth
diferencias en el campo: Descripción
[p]dmesg[/p]
[code][ 1.770796] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 2.324526] forcedeth 0000:00:07.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:1a:4d:83:f2:3d
[ 2.324529] forcedeth 0000:00:07.0: highdma pwrctl mgmt lnktim msi desc-v3
[ 20.814573] forcedeth 0000:00:07.0 eth6: renamed from eth0[/code]
[p]lspci -vvnnk[/p]
[code]00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 24
NUMA node: 0
Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable+ DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable+ Count=1/8 Maskable+ 64bit+
Address: 00000000fee01004 Data: 4025
Masking: 000000fe Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth[/code]
[code]00:07.0 Bridge [0680]: NVIDIA Corporation MCP61 Ethernet [10de:03ef] (rev a2)
Subsystem: Gigabyte Technology Co., Ltd MCP61 Ethernet [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (250ns min, 5000ns max)
Interrupt: pin A routed to IRQ 21
NUMA node: 0
Region 0: Memory at f5006000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at cc00 [size=8]
Capabilities: [44] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [6c] HyperTransport: MSI Mapping Enable- Fixed+
Kernel driver in use: forcedeth
Kernel modules: forcedeth[/code]
El contenido de esta página está en Dominio Público. (vea la página CC0 para información detallada). Cualquiera es libre de copiar, modificar, publicar, usar, vender o distribuir el texto para cualquier propósito, comercial o no comercial, y por cualquier medio.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information