Home » Hardware » acquisition cards » Brooktree Corporation Bt878 Video Capture (rev 11)
acquisition card Brooktree Corporation Bt878 Video Capture (rev 11)
Modell: Brooktree Corporation Bt878 Video Capture (rev 11)(Modell-ID: 553)
Andere mögliche Gerätenamen:
PixelView PV-M4900 FM.RC (video capture device)
Brooktree Corporation Bt878 Audio Capture (rev 11)
LeadTek Research Inc. Bt878 Video Capture
LeadTek Research Inc. Bt878 Audio Capture
Hersteller:
Brooktree Corporation
Hersteller-ID:Produkt-ID des Gerätes:
109e:036e
Jahr der Markteinführung:
2006
Schnittstelle:
PCI
überprüft mit Distribution:
Parabola GNU/Linux
Trisquel 5.0 Dagda
Überbrüft mit folgendem freien Betriebssystemkern (Libre Kernel):
5.4.2-gnu-1
2.6.38-11-generic
Funktioniert mit Freie Software?
Ja
Verwendete Freie Firmware/Treiber:
bttv
Beschreibung:
lspci -nnpk
03:04.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 02)
lspci -vmmnn
Slot:	03:04.0
Class:	Multimedia video controller [0400]
Vendor:	Brooktree Corporation [109e]
Device:	Bt878 Video Capture [036e]
Rev:	02
lspci -v
03:04.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
	Flags: bus master, medium devsel, latency 32, IRQ 169
	Memory at fc001000 (32-bit, prefetchable) [size=4K]
	Kernel driver in use: bttv
	Kernel modules: bttv

Dual card with both Audio and Video separated in two. Doesn't work on parabola because the bttv module is not present in linux-libre which is probably the cause of the IO error in lspci.

lspci -vvnnk

03:02.0 Multimedia video controller [0400]: Brooktree Corporation Bt878 Video Capture [109e:036e] (rev 11)
        Subsystem: LeadTek Research Inc. Bt878 Video Capture [107d:6609]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (4000ns min, 10000ns max)
        Interrupt: pin A routed to IRQ 15
        Region 0: Memory at fdffe000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
                Not readable
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

03:02.1 Multimedia controller [0480]: Brooktree Corporation Bt878 Audio Capture [109e:0878] (rev 11)
        Subsystem: LeadTek Research Inc. Bt878 Audio Capture [107d:6609]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
        Latency: 32 (1000ns min, 63750ns max)
        Interrupt: pin A routed to IRQ 15
        Region 0: Memory at fdfff000 (32-bit, prefetchable) [size=4K]
        Capabilities: [44] Vital Product Data
pcilib: sysfs_read_vpd: read failed: Input/output error
                Not readable
        Capabilities: [4c] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

hwinfo --tv

08: PCI 302.0: 11200 TV Card                                    
  [Created at pci.386]
  Unique ID: 08OF.peMDrNNcLvF
  Parent ID: 6NW+.RlqjBL7v2IB
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:03:02.0
  SysFS BusID: 0000:03:02.0
  Hardware Class: tv card
  Model: "Brooktree Bt878"
  Vendor: pci 0x109e "Brooktree Corporation"
  Device: pci 0x036e "Bt878"
  SubVendor: pci 0x107d "LeadTek Research Inc."
  SubDevice: pci 0x6609 
  Revision: 0x11
  Memory Range: 0xfdffe000-0xfdffefff (ro,non-prefetchable)
  IRQ: 15 (no events)
  Module Alias: "pci:v0000109Ed0000036Esv0000107Dsd00006609bc04sc00i00"
  Driver Info #0:
    Driver Status: bttv is not active
    Driver Activation Cmd: "modprobe bttv"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #9 (PCI bridge)

Write below your motivation

The contents of this page are in the Public Domain. (see the CC0 page for detailed information). Anyone is free to copy, modify, publish, use, sell, or distribute the text for any purpose, commercial or non-commercial, and by any means.
h-node.org is a hardware database project. It runs the h-source PHP software, commit cdeda15, available under the GNU General Public (GPLv3) License.
JavaScript license information